Coleman Cable Automotive Battery Booster Cable 8 Gauge 12 Feet

Coleman Cable Automotive Battery Booster Cable 8 Gauge 12 Feet

1 ct pkg



Batteries produce explosive gases: Note - consult automobile owner's manual and follow all instructions. Shield eyes and face from batteries at all times. Be sure vent caps are tight and level. Place damp cloth over any vent caps on both batteries. Handle cloth carefully - do not allow cloth to come in contact with eyes, skin or clothing. Be sure vehicles do not touch and both electrical systems are off and the same voltage. Be careful to avoid moving fan blades. California proposition 65 warning: this product contains chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.


Road Power® 8 Gauge/ 12 FT. Medium-Duty Booster Cables. 50% more power than 10 gauge. Fits top and side post batteries. Ergonomically designed handle. Engineered for warm & cold climates. Limited lifetime warranty. CCI®. Meets or exceeds SAE standards. Cable type. Selection guide: Grade/GA - power level - vehicle. 4 gauge extra heavy-duty - 250% more than 10 gauge - SUV's trucks. 6 gauge heavy duty - 150% more than 10 gauge - full size. 8 gauge medium duty - 50% more than 10 gauge - mid size. 10 gauge light duty - N/A - compact. Cable length. Selection guide: 12 ft. (3.66 m). 16 ft. (4.88 m). 20 ft. (6.10 m). Limited lifetime warranty: All Coleman cable cord products are individually tested and inspected for defects in material and workmanship before leaving the factory. Should your Coleman product ever fail due to faulty workmanship or material, simply return it to the place of original purchase for a replacement. Our lifetime return policy is limited to there place-ment of the original purchase. No other liability, responsibility or warranty is expressed or implied including any regarding merchantability or fitness for a particular purpose.

How to jump start an engine: Step 1: connect POS(+) cable to POS(+) terminal of stalled vehicles battery. Step 2: connect other end of POS(+) cable to POS(+) terminal of booster battery. Then connect NEG(-) cable to NEG(-) terminal of booster battery. Step 3: connect NEG(-) cable to engine block or chassis of stalled vehicle. Do not connect to negative post. Start vehicle and remove cables in reverse order of connection.

Country of Origin


Coleman Cable, Inc


1530 Shields Drive, Waukegan, IL 60085