Smart Living Mechanical Timer
1 ct pkg
Warnings
Warning: Risk of electrical shock. Grounding continuity must be maintained. Consult a qualified electrician to determine if cover plate screw is grounded. Grounding protection will not exist if adapter is improperly connected. Always attach grounding tab to a grounded wall plate screw. Do not use with extension cords or ungrounded 2-slot outlets. Keep children away. Fully insert plug. Use indoors only. Do not use in wet locations. Risk of fire. Do not exceed electrical ratings
Details
125VAC/60Hz/15A/1875W Resistive. 8A/1000W Tungsten. 500VA Electronic Ballast. 1/2HP Motor Load. Easy to use. Pins down = on. Up = off. 1-Outlet 24hr Mechanical Pin Timer. 1 polarized outlet. 48 pin setting dial. Slide pin construction prevents lost pins. Manual on override switch. ETL approved for CFL bulbs. For product questions or concerns, contact us at 1-833-992-3872.
Step 1. Set a period of time for the unit to be on. make sure all pincs are in the upper position before beginning. Locate the black pins and push them down at the marked times when the attached device is to be on. Each pin represents a 30-minute time interval. Step 2. Set the current time rotate the entire black push-pin dial clockwise until the arrow aligns with the current time of day on the dial. Step 3. Set bypass switch when the switch is in the clock position, the unit will automatically turn your attached device on and off according to the programmed time. When the switch is in the on position, the unit will bypass the programming and your attached device will remain on. Step 4. Plug the unit into an electrical outlet. The unit will rest against the outlet. Step 5. Attach one device to the unit plug the device into the outle on the side of the unit. Make sure the attached device is switched on.
Country of Origin
China
Manufacturer
Adusa Distribution, LLC
Phone
833-992-3872